1 / 12
Bosch GAS 35 L <=> Starmixx Dustfixx Adapter — zdjęcie 1
1 / 12

Bosch GAS 35 L <=> Starmixx Dustfixx Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D-printed adapter set for connecting a Starmixx Dustfixx pre-separator to a BOSCH GAS 35 L vacuum cleaner.

Ocena
0 / 5
Polubienia
6
Pobrania
70
Wydruki
0
Wyświetlenia
1067
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A 3D-printed adapter set for connecting a Starmixx Dustfixx pre-separator to a BOSCH GAS 35 L vacuum cleaner. In my example, I have also integrated a drawer for storing frequently used suction adapters, etc. However, the adapters can just as easily be mounted on a wooden board.

The adapter set consists of remixes of the following parts as well as custom-made parts.

  • I remixed this adapter set: thanks @bennowolf 
    https://makerworld.com/en/models/1052579-l-boxx-workbench-plate-holder
    • Changes to the original design: The operating concept has been revised so that no cutout is required in the board; instead, the locking mechanism can be operated from the front. I have also adjusted the tolerances and fit.
    • Parts needed for assembly:
      • 6x M3x6
      • 6x Ruthex M3 threaded insert
      • 2x 6x30 spring (I used 0.5x6x30)
  • I created the adapter set to mount the Dustfixx to the wooden board
    • Parts needed:
      • 4x 5x20mm spring (I used 0.5x5x20)
      • Woodscrews to secure the adapters to the wooden board
  • I remixed this connection hose adapter: thanks @tapani.siivo
    https://makerworld.com/en/models/167516-bosch-gas35-hose-connector
    • Changes made to the original design: removed the “nose” and changed the fit, so that it can be connected to the Dustfixx intake.

Tagi