1/5 scale RC Chassis 4x4 with belt drive
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Powerfull and reliable 1/5 RC car with 100% printed drivetrain parts.
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 167
- Makes
- 0
- Views
- 1,895
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 16.5.2026:
new front shock mount, upper control arms and added belt tensioner
All parts can be printed in PLA. I recommend printing the small 12T motor gear in PC, as it might melt in PLA when the motor gets warm. I never managed to breake a drivetrain part, so its safe to say the model is dead reliable.
Parts you will need:
-<2000KV 1/8 scale motor and ESC
-3-6s lipo
-M3, M4, M5 screws and nuts
-16x 30x7x42mm bearings
-2x 15x9x32mm bearings
-1x 18x412mm high speed bearing
-1x 3PJ 1016mm belt
-50x 8mm steel balls
-600mm SW10 aluminium or steel hex rod
-142mm 1:8 scale shocks + oil for the shocks
-1:5 scale tires with SW24 rims
-servo
-2x M3 ball joints
-8x M5 ball joints
- 2kg of PLA Filament