1 / 12
Passive PoE Injector for MikroTik RB5009
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the 8-Port Passive PoE injector from AliExpress, designed to be mounted on the MikroTik router…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 377
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a case for the 8-Port Passive PoE injector from AliExpress, designed to be mounted on the MikroTik router RB5009.
Bill of Materials (BoM):
- 1× 8-Port Passive PoE injector Aliexpress
- 2× screws
- 1.75 mm transparent PETG (for the case LED hole)
Assembly notes:
- Remove the LED support from the PCB before mounting it into the case, or remove the LED entirely.
- Insert a piece of 1.75 mm transparent PETG into the LED hole.
- Optionally, you can use a hot air gun to heat the sticker from the old case and reapply it to the new one.
Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 25%