Baby Gate Saddle Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.05 – €2.51 net (excluding VAT)
For file: gate_brakcet_saddle v1_0.4n_0.25mm_PLA_MINIIS_1h44m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.28 excluding VAT (range midpoint).
- Weight reported by the author
- 40 g
- Print time reported by the author
- 1.73 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A mounting bracket for doorway baby/security gates fixed by screws.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a baby/safety gate from a consignment sale for my basement stairwell and it didn't come with the mounting cups. Even if it did, I wouldn't have felt satisfied with a single screw mount to affix to a wall with an injection molded cup that barely seats the friction foot.
The brackets give a more rigid mounting brace for those babies and toddlers that like to grab hold of a gate and rage against the bars as if they were wrongfully detained from the danger beyond. the bracket surrounds the gate foot and the bolt it is attached to.
This is a variant of my original baby gate bracket. Instead of a through-slot, the bracket has a saddle that a gate can be dropped into a specified height. This is meant to make dropping in the gate a little more repeatable and give a little more structure to the bracket.
The original bracket can be found here:
The brackets have countersinks for #12 screws. The slot for the screw post is 16mm wide. The slot for the post foot is 45mm long, 8.6mm wide. the saddle is 35mm down from the top of the bracket.
To maximize strength for typical loading conditions, print more than 2 walls/perimeters. Print with the slot vertical in the Z axis as seen in the picture.
Notes and Updates:
5/1/2026 update:
Thank you to everyone who has downloaded, made, rated, commented, and added this model to collections. I'm getting back into making designs of things I enjoy and find useful, and I'm setting up a Ko-Fi account as a way for people to send a financial tip or thank you, only if you feel led.
If you do leave a tip, please share which model you came over from and what you enjoyed about it!