Baby Gate Saddle Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a baby/safety gate from a consignment sale for my basement stairwell and it didn't come with the mounting cups. Even if it did, I wouldn't have felt satisfied with a single screw mount to affix to a wall with an injection molded cup that barely seats the friction foot.
The brackets give a more rigid mounting brace for those babies and toddlers that like to grab hold of a gate and rage against the bars as if they were wrongfully detained from the danger beyond. the bracket surrounds the gate foot and the bolt it is attached to.
This is a variant of my original baby gate bracket. Instead of a through-slot, the bracket has a saddle that a gate can be dropped into a specified height. This is meant to make dropping in the gate a little more repeatable and give a little more structure to the bracket.
The original bracket can be found here:
The brackets have countersinks for #12 screws. The slot for the screw post is 16mm wide. The slot for the post foot is 45mm long, 8.6mm wide. the saddle is 35mm down from the top of the bracket.
To maximize strength for typical loading conditions, print more than 2 walls/perimeters. Print with the slot vertical in the Z axis as seen in the picture.
Notes and Updates:
5/1/2026 update:
Thank you to everyone who has downloaded, made, rated, commented, and added this model to collections. I'm getting back into making designs of things I enjoy and find useful, and I'm setting up a Ko-Fi account as a way for people to send a financial tip or thank you, only if you feel led.
If you do leave a tip, please share which model you came over from and what you enjoyed about it!