1 / 3
AFU Charger Extra Protective Bumpers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I broke my last AFU charger after thousands of miles of abuse, so this is the upgraded pads
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
TPU with 2 walls and 15% gyroid infill gives a nice cusion. Print with normal automatic supports with the z top distance at 0.25mm for a good release (assuming a 0.4mm nozzle and 0.2mm layer height). Orient it such that the support is as short as possible, with the short side down, flat on the bed.
AC side is shorter than the DC side, which is the taller one. Feel free to mix it up and use two short or two tall if you're feeling crazy