1 / 3
clutch for PET Puller Gearbox (based on PETamentor2 SS)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed based on a different stepper motor smaller than the one calculated in the original design.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 40
- Makes
- 1
- Views
- 138
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Standard Digital File License
To attach it to the gear wheel, you will need: 4 pieces M3x16mm bolts & 4 pieces M3 nuts
Print speed: 60 mm/s
Infill patern: Cubic
Infill: 30%
For PLA - Nozzle Temp: 195 °C - Bed Temp: 60°C
For PET recyclated filament