Insulated whatever-size-you-want(ish) Frankenclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Models and instructions for an enclosure I built for my printer. Easily adapted to different sizes or even purposes.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store
Background story: I ordered a tent-style enclosure for my AD5X from BTT on AliExpress. There were issues with the shipping, it got refunded. I decided to make my own. In the past I had used the hack of making a cube out of interlocking foam mats, and found they do a great job of both keeping heat in and reducing noise, so wanted to make my enclosure out of them.
I thus set out on this project with very little planning, and not really knowing what I was doing, just making it up as I went along. It ended up as a total Frankenstein of different materials and techniques, hence calling it a “Frakenclosure”… but it works, very well. People have said they like the look of the result, so I've decided to share it. (Please note: The faceplate shown in my photos is NOT included here. I have chosen to share only the functional parts, not the cosmetic addons like that.) It is probably very possible to improve on this, but the general ideas and models will still be useful while doing so. FreeCAD files are also included; I'm kinda a noob with FreeCAD so don't expect them to be optimally designed.
Because of this, I am not able to provide exact instructions (especially measurements, as I frequently re-cut pieces during construction along the lines of “I'll just take off so-and-so mm”) and this will be a bit of an “experiment and see” project. Think of it more as “here's some parts that might be useful, and here's an idea and general plan to get you started on doing something with them", rather than “here's full instructions with exact measurements on how to make something”. It may be worth taking a look at the in-progress photos too. You're also welcome to ask questions and I'll try to answer.
And in case you didn't figure it out yet - this is very much NOT just a “print everything, with minimal effort” model. Printed parts are a minority of this; most of it is going to be cutting and assembling various materials (dowel rods, foam mats, etc).
If you are using this for a printer enclosure or any other purpose that's subjected to a lot of heat (eg. grow tent), make sure to use an appropriate material for the printed parts. PLA is not suitable for any of the parts that are on the inside of the enclosure (it should be okay for parts that are on the outside, eg. the door latch). PETG is acceptable, but ABS/ASA would be better.
My general process was to build a frame out of 10mm dowel rods cut to length, using the Corner and Extender pieces from this to connect them (might be a good idea to print them with fuzzy walls, especially if you're using a filament like PETG that tends to not adhere the best to superglue - although I only thought of this after I had printed mine, in PETG, and I still managed to get it to work). Because I wanted the height to be larger than a single foam mat's size, I used the vertical extenders to seperate the height into two sections. This also provided reinforcement. (There is no reason that this can only be done vertically. If you want to do it horizontally too, go for it!) The “Straight Reinforcer” and “Corner Reinforcer” were placed half way along the long dowel sections - I didn't bother with them for the short vertical extension. On the right side, I used “Straight Reinforcer Alt” to provide more space to cut a door, as I wanted this door to be as large as possible (for two reasons - more space to work with when changing / checking the spools, and to make it easier to get the printer itself in and out of the enclosure).
Once I had the frame assembled, I then cut foam mats to size and superglued them to the corner / reinforcer / extenders. Note that the textured side of these mats (at least the ones I had) has outright terrible adhesion to superglue; so make sure you glue the smooth side. (There are ways to get things glued to the textured side. We'll come back to that when doing the latches for the doors.)
For two of these mats (front and right), I cut doors out of them. For these doors, I used “Door Reinforcement Corner” to create a square made of dowels to reinforce the door. In hindsight, it would have greatly benefitted from a similar structure around the door hole as well as on the door itself. These are to access the print surface (front) and spools (right) on the AD5X.
The mats I had were just enough to cover the faces, but left an empty space at the corners, so I cut small strips and glued those to the existing mats (the sides glue together just fine, it's only the textured front that doesn't) to tidy this up a bit.
I used a hot glue gun to fill in the gaps. Like superglue, hot glue will not adhere very well to the textured side of these mats (in fact, it seems almost nothing does), but it has excellent adhesion to the sides when filling in cracks like this. There's an old adage that a 3D printer is “just a glorified hot glue gun”; thinking of this in reverse really helped me get my head around how to actually use the hot glue gun here - I thought “if I was a 3D printer, what kind of extrusions and where would I want them in order to seal this up?”
Hinge assembly should be pretty obvious. You'll probably want two hinges per door (you can go three for larger doors if you want), and each hinge needs 2x “Hinge (Door Side)” and 1 each of every other hinge piece (Frame Side, Pin, Pin Cap). Assembly is very straightforward - slide a door side, a frame side, and another door side (all the same way up) onto a pin, put a bit of superglue on the tip of the pin (it's completely fine if the pin ends up sticking to the door side piece, it'll still work), then push the cap on firmly and hold it tightly in place for a few seconds. You should leave this one to set for longer than you usually would when gluing things together, especially if you made the hinges out of PETG.
I initially tried glue for the doors, but found nothing would get the hinges bonded well enough to the textured side of the mats. So instead, I made some screw holes in the flat plates of the hinges (I did this with a self-drilling screw on the physical prints, hence why there's no hole in the 3D models), and just screwed them onto the mats. As long as you tighten the nut quite a bit, screwing through the mats actually works pretty well! You'll want to first “drill” a hole with a self-drilling screw of some kind, then thread your normal screw through that afterwards.
For the latch - you might be able to modify it to screw on as well, but because of the relatively small size and (compared to the hinges) low force it needs to withstand, I was able to get it to glue by using a knife to first carve a cross-hatch pattern (about 3-4mm deep) where I wanted to attach it, then just scraping away at it randomly to create a rough, textured, uneven pattern. In particular, I made sure that some of the scrapes were cutting into the sides of the “hole”. Then, I took the superglue, filled the hole (basically squeezing the tube quite hard so that it forcefully spread into the scraped hole) and placed the latch on. It's important to NOT apply too much pressure here - you want the latch firmly pressed against the mat, but you don't want to actually squash the mat and spread all of the glue out of the scraped hole. It might take a couple of tries to do this right.
The latch pin just clicks onto the latch; considerable force is needed to make this happen. (I have only tested this with PETG; it might be that other materials aren't flexible enough for it to click on at all. If so, a bit of sanding on the corners of the part that clicks on, might help.) Note that the latch pin model as provided in the STL / CAD files is designed for a latch that's placed to the left of the door it holds closed; for a latch on the right, mirror the latch pin before printing it.
The last thing I did was cut a small space for a humidity / temperature sensor… then decide I didn't like that location, so I cut a small piece of foam mat to fill in the hole and cut a different location to put the sensor.
If anyone finds measurements / etc that work well for specific printers, ways to improve the techniques, or other improvements to this - I fully encourage remixing and sharing those instructions. (For starters, replacing the dowel rods with a metal or high-grade-plastic equivalent would probably be a very worthwhile move… I was just being cheap, especially since I wasn't 100% confident in this project.)