1 / 1
Sizable, Airtight storage container
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We wanted a couple of storage containers for the kitchen. They will keep almost anything fresh.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These drawings are not parametric, but can be sized in the parameters of Freecad.
The thread for the cap is custom, and I could not ever get it to parametrically scale
(if you change the container dimensions, you will have to monkey with the thread in Freecad.)
Support is not needed; If you orient the container standing up, & the lid upside down.
Print the seal upside down ( small taper facing up word) with TPU90 or similar.