1 / 1
Voron V2.4 Hinge, M3/3mm 120deg hinge (Remix of quattroerik design) — image 1

Voron V2.4 Hinge, M3/3mm 120deg hinge (Remix of quattroerik design)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of the original hinge by quattroerik from the Voron mods library/database

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
106
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

This part is associated with Voron purely because it came from the Voron Mods Database, with the original by quattroerik. I was looking for a pretty much “print and use” style hinge for 2020 extrusion and this one was as close to perfect as I could find. It seemed well thought out, fairly minimal, used a 3mm rod (though I intended to use some long 3mm machine screws), and it would allow me to mount on the outside of the 2020, use 3mm acrylic with 1mm foam, all while being fairly flush. For fun, I'm slowly working on getting everything needed to upgrade my Mk3s to a Prusawire, so Voron in spirit and this seemed a fitting starting point for non printer mods while working through procuring things I just don't have on hand.

I knew it didn't match all of the things I needed exactly, but thankfully quattroerik also included the original Freecad files, and since I've been looking to slowly learn more about Freecad these past few months, it was a perfect “almost but I can tweak it to my needs” kind of model.

My enclosure is a premade from Amazon. The acrylic came as a “magnetic” attachment style, no hinges. (Tiopy brand, marketed for an A1). The actual enclosure itself was pretty well designed but had a few things that left room for improvement, with the door being the second largest item I needed to work on to make it better. With that, I also wanted to fill in or at least cover the existing screw holes.

Main changes from the original

  • Increased the height of the attachment bracket
  • Increased height and width of the acrylic attachment part
  • Added 2 screw holes (which match 2 of the 3 from the original panel)
  • Added a full pass through for the 3mm screw on the hinge bracket, with a recess for the screw head.

For this you'll need a 55mm M3 screw if you're looking to screw from the bottom and secure with a nut. Alternatively (and how I ended up running it), just place a M3x50mm screw from the top and it will act as a hinge pin. This would be better off as a pin like the original, but I don't have any and I'm not planning to order any at the moment.

 

Files included

  • FC Files for both parts, along with a single assembly including both on a pivot for visualization purposes (I wanted to try something new)
  • STEP files for both parts and the assembly. Recommend you flip the door panel part to print upside down, and make sure the angled side is facing your part cooling fan for the best result.

Print at 70-80% infill, Material of your choice. As mentioned above, flip the door panel part upside down, no supports required, and face the angled side (non screw side) towards the part cooling fan for the best result

Tags