Counting matching models…
When I was printing my custom AMS version for Pidge's knucklebones game - the hinges snapped after I pulled it off the print bed. I really didn't want to go through and print an entirely new game board since everything else was great - so…
VZBOT 235 AWD - 180° door hinges for CNC kit The original hinges loosened very little and interfered with manipulation around the printer. The remixed model was for the printed version with 2WD, this one is on AWD - CNC kit. In addition,…
Everyone has one, like pens they vanish into some parallel dimension, they do break if you really need them. A folding ruler 2m to measure furniture, rooms or makes. This model provides print in place hinges which are pretty durable.…
I wasn't lucky with that nice hinges from nadir. It was because my workspace is so tiny that I can't let the doors open during PLA printing. With closed doors, the heatbreak gets clogged after max. one hour of printing because the cooling…
A foldinge ruler 3m (extended edition) to measure furniture, rooms or makes. This model provides insets for 10x2.5mm round magnets as hinges and 6x2mm magnets for stability and snap into position. They all should be aligned in the same…
------------> ENGLISH <------------ You can't glue any of the plastics of the Twizy. That's the way it is! Take it for granted. That's why ALL my spare parts for the Twizy are screwed. This is a remix. Some minor improvements: Added hole…
I had the problem on the K1C of the tool head opening the door when homing, I don't wanted to cut the stock top hinge so I printed this piece 100% infill using ASA CF see original:…
These are some hinges for the top panel of the original SV08 enclosure (could probably be used with other printers). The panel should be removed when printing materials that need good cooling (like PLA). These hinges take advantage of the…
Split to objects and print hinges separately using PP or TPU. Use a brim on hinges. Set top and bottom surfaces to Octagram spiral to achieve the star effect shown in photos. Approximate sizes: SMALL Box= 150mm x 75mm MEDIUM Box= 200mm x…
Disponible avec ou sans rebord ------------------------------------------ Available with or without rim
Modified the original just to remove the pad for VHB if you are just mounting theors ia hardware Created a hole and placement template to make drilling mounting holes easier
I really like the hinged version of Top Cover mode for CoreOne, but I only have 8x3mm magnets at home so I remixed the original back cover with 105°angle to hold them. Also i used stepped chamfers from main Top Cover model so it snaps…
Guard plate b1 and b2 now can have metal hinges mounted with m3 screws and nuts aliexpress hinges: https://it.aliexpress.com/item/1005006171879918.html?spm=a2g0o.order_list.order_list_main.5.22793696tWxJ7x&gatewayAdapt=glo2ita
# Denon DP-900M / Pioneer PL-PM2000 - Dust Cover Hinges Replacement hinges for turntable dust covers. The original plastic hinges are known to break after 25+ years of use. Why This Model? - Many of these used turntables are sold with…
Improved version of the original V1 hinges for Ratrig V-Core 4 500mm and 400mm! The corner brackets do not have to be removed anymore. Original version: https://www.printables.com/model/1090231-ratrig-v-core-4-split-front-panel-hinges…
Hardware: X8 M2 nuts X6 M2 washers X4 M2 x 12mm countersunk head screws X2 M2 x 16mm countersunk head screws To mount them I drilled a 2mm (5/64") hole 54mm (2 1/8") in the center of the box sides, 6mm (1/4") down. I double nutted the…
270° Print-in-Place Door Hinges for Elegoo Centauri Carbon Upgrade your Elegoo Centauri Carbon with these functional print-in-place door hinges that extend opening range from the stock 90° to a full 270°, providing dramatically improved…
Read more about about this print: https://www.funkyton.com/print-your-own-backgammon-set/ Scaled up 50% in width and depth, with a custom height. Holes made for 4x2mm magnets. Based on @Modellaner's version. Required print volume: 155mm x…
C-Hinge Assembly for Polyknot Construction The components for building a new class of entangled geometric structures. A polyknot is a structure that combines the topology of knots and links with the geometry of polyhedra — organizing…
Jig for door overlay hinges (Hole diameter 35mm) Шаблон для накладных дверных петель (Диаметр отверстия 35мм )
Make precise door installation easier with these practical brackets. This small tool allows you to quickly and evenly al
I included the adapted part (+5mm) for the automatic vent block for the CoreOne+ as well here. I know that there are a few top covers out there already for the Core One/+. I made my own take on it since I wanted it to be as thin as…
Door hinge of the Voron 0.2 for the original Voron V0.0 kits with 2mm or 2.5mm panels. Fits exactly like the original hinges, follow the Voron 0.2 assembly instructions. Mods installed on my VORON:…
A very slim, credit-card-sized phone holder with TPU hinges. The design needs to be split and the material changed for hinges. The TPU is locked in PETG in the second layer.
I've created a simple adequate pair of door hinges that offer the same benefits of other great hinges that have come before, but reduced down to adequate strength and size to save on print time, material and frustration. I also prefer a…
My version of the body kit for MD24 from Meus Racing . You'll need four M1.4 x 5 mm screws and four M2 x 5 mm screws. The magnetic mount that comes with the frame is included (because once the magnets are in the mount, the whole thing…
OK, there are a lot of "Phone stand" model. But this one is not the same. I made it to be: Foldable for carrying It gives a 45 degree phone angle Possible to use phone in horizontal or vertical position Nice looking Printed in place as a…
change from hinges to snap mechanismus
Audi A2 fuse door clips, hinges - booths sides with right size The dimensions are exactly as they should be. Left - smaller. Right - normal size Parametric, Freecad v1.1 parametric file included Remix. Mounting Uncover the foil with the…
plss sorry, I forgot I cant upload pdf to printables description, I have made a complete pdf, plss view that here in the link https://jumpshare.com/share/lHNTqyl9FUte0wC3uWgi Adjustable Phone Stand With a lot lot of hinges/joints Assembly…
I was sick and tired of the massive VFAs of the original LDO nema14 motors so I did the “Voron V0.2 Nema 17 mount” mod, but now the tophat and backplate did not fit anymore. So….. I modeled all neccesary parts to not only make the tophat…
Note: Does NOT work on the K1 Max. Design Summary: The Creality K1 is an excellent printer, but Creality's choice of door hinges is questionable. A partially opened glass door simply seems like an accident waiting to happen. I looked at…
This riser, combined with the guider included, gives better TPU printing, much better, and no sharp turnings, PTFE tube path, which means more reliable printing of filaments with CF. The tube will not touch the lid, and it comes from the…
Does your Prusa Enclosure have the lid mod? Do you like @MichaelQ 's Slider Lock Latch but you installed @PetrZikumd 's Complete modified Hinged lid for Original Prusa Enclosure mod? This mod will work with all of the above! You'll need…
Here's my version of an extended top cover holder for the Creality K1, with hinges and built-in LED strip holders. I've also uploaded a STEP file so you can see how everything is assembled and modify it if necessary. The focus here is on…
I printed the box in Prusament PLA with 0.15 layer height speed profile on MK4 MMU3 (no space for purgetower - so it's a single color print). The magnets require a bit of force to be inserted. I used a hard object to press one side into…
Building your own enclosure from poly-carbonate sheet is a much cheaper alternative to buying the original. This design avoids external hinges that would require you to drill into your frame. These hinges use the original mounting…
This are beefy door hinges to attach a 2020 doomcube style fridge door. This is an improvement on my first design where I borrowed heavily from WhoppingPochards clicky clacky door hinges. It is designed to use the following hardware based…
When I was printing my custom AMS version for Pidge's knucklebones game - the hinges snapped after I pulled it off the print bed. I really didn't want to go through and print an entirely new game board since everything else was great - so…
The 60 x 10 x 3 mm magnet is for the sleep-cover-function
I dont need it at the moment, so I didnt print it. But it is similar to my HD3 case: https://www.printables.com/model/1013260-rugged-case-for-pocketbook-touch-hd3-v2-with-hinge The 60 x 10 x 3 mm magnet is for the sleep-cover-function
Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen and also guarantee no sanding/post processing would be needed with an out of spec print. Newer fat links are…
As I have limited space for my printers in my office, I had to come up with something to reduce the footprint of the enclosure latch and hinges. This design uses a magnetic latch instead of the original lever latch system. You can either…
I love the glass door on my Infimech - but I'm always paranoid I'm going to break it while working on the printer. So I hacked up a quick set of replacement hinges to allow the door to be lifted on/off the printer. EDIT 10/10/24: Lost the…
I liked very much the model by @3Dservis for a pirate doll my wife is doing. The hinges did not convince me so that is why I modelled integrated ones.
Used the idea from https://www.printables.com/model/881165-door-hinge-remix to build a set of door hinges for my RatRig VCore 4. At least all parts have been changed, adapted, modified to be used on my printer. For each hinge 2 magnets…
A simple parametric box with latches on each side, no hinges
A cool looking spider with hinges that uses filament tips: cut the filament at a 45-degree angle before inserting while inserting the filament twist it and make sure it is as tight as possible printing tips: print the legs at 100% infill…
I created my self diy enclosure and the doors with hinges, which can be mounted without drilling the case or glue. The doors can be get removed very easily with the hinges. I used Acrylglas for the doors. the third part is the door holder…
The IKEA Samla clips are great for keeping the bin closed. I got tired of putting them down and dropping or losing them, so I've added a multi-link hinge with an end that can be adhered to the bin side. Print Settings Printer Brand: Prusa…
small alteration full props to the original disigner https://www.printables.com/model/575428-ts101-soldering-iron-case-print-in-place
Drill and router Template for 1.75in by 2.5 in ring box with 8mm barrel hinges
VZBOT 235 AWD - 180° door hinges for CNC kit The original hinges loosened very little and interfered with manipulation around the printer. The remixed model was for the printed version with 2WD, this one is on AWD - CNC kit. In addition,…
I made an enclosure out of 5mm polycarbonate but did not like the hinge system. It did not feel robust and I had a lot of gaps and the door pinching on the frame when opened. I printed the original design but the hinge pin broke, so I…
SV08 Door Hinges to use M3 screws for posts instead of printing the posts. I used foamboard for my panels, as it was cheap and available at the dollarstore.
I was building my own DM screen and had regular hinges glued into it, but they just didn't last. So I desigend these hinges and corner brackets to replace them. You'll need to print 2 of them as they come and 2 others mirrored. You will…
Small hinges with few of combinations. U can use litle of filament to put inside of holes and it's working incrediable good! Sizes: hole inside 2mm hole outside 4mm thickness of plate 2mm screw hole 3mm with phase0.5mm and in 1mm Size of:…
The model has been separated into 2 parts, base and hook. The hook is adjustable via dove-tail joint, either slide it in and out as required. The base was printed in 100% full scale with 15% infills. The hook was printed in scaled 99%…
3D model for hinges of Fresh 'n Rebel's CULT 3HP2000 v1 001 headphones
Hinges for a 3D printer cabinet with 3mm MDF panels, uses M3 bolts to hold the panels, and wood screws to attach to the frame
I wasn't crazy about the top hinges that came with the Printer-box spool tank. They were too noisy for me. I replaced them with magnetic hinges. I used 20x5x2mm magnets ( https://a.co/d/1UpfRBX ). This uses the same screws as the original…
This is another hinge solution for a split door for a V-Core 4/300. Doors can be opened more than 180°. Can also be adapted for a 400 and 500 printer. Side panels and the doors need some cut outs. These hinges are NOT meant for mounting…
Everyone has one, like pens they vanish into some parallel dimension, they do break if you really need them. A foldinge ruler 2m to measure furniture, rooms or makes. This model provides insets for 10x2.5mm round magnets as hinges and…
Gridfinity tile holding a TS100/101/80/Pinecil rugged case with 3 hinges. I remixed this model in order to be able to store vertically my Pinecil XL Rugged Case for my TS100 and its accesories. I've included PLA and PETG plates plus test…
Everyone has one, like pens they vanish into some parallel dimension, they do break if you really need them. A folding ruler 2m to measure furniture, rooms or makes. This model provides print in place hinges which are pretty durable.…
A foldinge ruler 1m (kids edition) to measure furniture, rooms or makes. This model provides insets for 10x2.5mm round magnets as hinges and 6x2mm magnets for stability and snap into position. They all should be aligned in the same…
A folding ruler 1m (kids edition) to measure furniture, rooms or makes. This model provides print in place hinges which are pretty durable. There are 6x2mm magnet insets for stability and snap into position. They all should be aligned in…
I wasn't lucky with that nice hinges from nadir. It was because my workspace is so tiny that I can't let the doors open during PLA printing. With closed doors, the heatbreak gets clogged after max. one hour of printing because the cooling…
A foldinge ruler 3m (extended edition) to measure furniture, rooms or makes. This model provides insets for 10x2.5mm round magnets as hinges and 6x2mm magnets for stability and snap into position. They all should be aligned in the same…
A folding ruler 3m to measure furniture, rooms or makes. This model provides print in place hinges which are pretty durable. There are 6x2mm magnet insets for stability and snap into position. They all should be aligned in the same…
Bottom Right and Top Right side braces modified to accept Creality K1 MAX Door Hinges Geared Print in Place
Abdeckung für untere Fensterscharniere / cover for lower window hinges Stützstrukturen werden benötigt / Support structures are needed
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
i tried to eliminate overhangs when doing this but there was just a couple that actually need it mostly under the lid. made in onshape before i learned about printed hinge solutions that are much better. i just might redesign this with…
Lockable hinges for prusa enclosure. Print with paint on supports mainly for hinge part. Do not add supports to the magnet slot!!!! hinge locks used from here: https://www.printables.com/model/36286-lack-locking-hinges-knobs
I created a semi-permanent door for my cat using the back patio screen door. I used Foam Core board, the heavy-duty 7/16" thick kind. The hinges are printed using TPU for flexibility. They are held to the door frame using thumbtacks. The…
Complete set of generic toilet seat hinges, including left/right hinge, nut and bolt, optimized for printing. I could only find replacements that didn't fit my old seat, or didn't fit the existing parts, so I made a complete set.…
These are very simple drilling template for Blum ClipTop concealed hinges. Mark the position, align the notch, drill/mark I have uploaded the two TB distances I generally use (4.5 and 6.0mm) - see drilling diagram
-------------------------------------------------------------- There was a mistake in the original 400mm panel dxf file, if downloaded before 03. Dec. 2024 load it again! Only the 500mm version is tested and verified! In the 400mm version…
I did not like the original plexiglass extensions, as they were not integrated into the model. Therefore, I designed extensions with better-fitting plexiglass and hinges.
Remixed for K1C with 6mm Lexan (PC) side panel(s). Roughly sliced together, you could definitely make them cleaner and with better tolerances. They are tight, I had to sand down a couple edges bc I made the tolerances too tight. I…
Voron V0.1 Tophat Spacer with Hinges Makes the tophat higher, stiffer and adds a hinge. Therefore its a lot easier to open the top and adds 20mm more space in the top for cable routing and higher Extruders. I added now also a Version…
A quick hinge I made for 2020 extrusion. For each hinge you need: 1 - 40mm M3 socket head cap screw 1 - M3 nut 2 - M3 washers 4 - 12mm M3 socket head cap screws 4 - M3 T-nuts Press the nut into the hexagonal opening in the smaller piece,…
Durable Hinges V1, designed for M4 Screws. Enjoy. Durable Hinges V2 Print settings: Layer height 0,15 Infill 15% Perimeters 3 Standard noozle 0,4mm Material PETG Supports No
Ho dovuto praticare un altro foro nella stampante per avvitare il bullone e tenere la porta
I have seen many print boxes with lid but not too many with hinges. So I have decided to design this small storage box and lid using hinges in Fusion 360. My original design had a 3 mm steel dowel for the hinges. This simpler revision is…
🔥 The Wait is Over: Final Model Version V4 is LIVE! 🚀 Introducing the upgraded Infinity Cube V2 – a refined version of the previous version! With key improvements, this version takes durability and playability to the next level. What’s…
🔥 The Wait is Over: Final Model Version V4 is LIVE! 🚀 Introducing the Infinity Cube V3.1! Building on the success of previous versions, the Infinity Cube V3.1 brings even more refinement, enhancing your experience with key updates that…
i used 3m emblem tape to mount and recommend a 10-32 screw to hold hinges to riser
You will need: M3x30 bolts (4pc) M3x10 bolts (12pc) M3x6 bolts (2pc) M3 nuts (8pc) M3 heat inserts (2pc) I recommend you to put some 2 sided tape on under the hinges to increase stiffness
These hinges are designed to align with the holes of the standard RatRig VCore 4 front panel, enabling it to be converted into two doors. While originally intended for 4mm side panels, these hinges are also compatible with thinner or…
I needed hinges that could open to a wide angle of 240° (180° on one side and up to 60° on the other side). Hinges are 50x140mm. Here, I’m offering this if someone finds it useful. Modeled in Autodesk Fusion.
This is inspired by Magnetic Door hinges for Voron 2.4, but adapted to 0.2 Additionally you can use magnets from ZeroPanels to help with the tight seal The design assumes your total thickness of the panel and foam is about 6mm with the…
Print in place, work the hinges a bit to separate. I find ironing the top, or just printing the top in concentric to be a nice finish.
I like a lot the original model but I have around a carton of those 3.5x20mm screws and Already made holes on my acrylic doors so I've remixed the model for fit them flush, I've also made a center part without tooth because I have a point…
![Parametric Latch box - no hinges [FreeCAD]](https://media.printables.com/media/prints/1020615/images/7751321_2a82ace9-ad66-496a-a62c-eca139efb739_ccde75db-ac8d-460f-add3-a49ae12a0f56/img_20240927_192143.jpg)
