100° Modified Hinges for Modern Gridfinity Case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.75 – €0.91 net (excluding VAT)
For file: Modded Hinges_0.4n_0.2mm_PETG_MK4S_53m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.83 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 52.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees.
- Rating
- 4.778 / 5
- Likes
- 97
- Downloads
- 326
- Makes
- 10
- Views
- 2,997
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees.
I never had any need for the mouse ears on the original files, so these don't have them. If needed you can always add them in your slicer. I printed with 4 perimeters and 100% infill, because the parts are so small it doesn't really add significant print time or material.
Functionally they install the same, although I highly recommend installing the hinges on to the case first. Otherwise there is much less room to get the filament in since the lid is in the way. The modified hinges stick up a bit more but the case still sits flat on the back.