Lottery Box Dnd Shaker Dice Set - Omikuji Style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A unique dice set inspired by the omikuji boxes seen in Japanese temples. Comes in D20, D12, D10, D8, D6, and D4.
- Rating
- 0 / 5
- Likes
- 5
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Commercial Use - No Derivative
Featured at Singapore's Design WAH! Showcase for Design Week 2025. I was overwhelmed by the positive reception to my little project and have made it available for purchase. If you happened to have seen this at the showcase, thank you so much for your support!
I created this dice set when I kept rolling Nat 1's on my first ever campaign, using a dice set I borrowed from a friend. Rightfully blaming the dice (and not my genuine misfortune), I decided to create a dice which i felt would give me fairer and more balanced rolls (unsupported by any mathematical equations cough).
The dice were designed to be printable with a single filament printer, so anyone with access to a 3d printer will be able to produce this at home without having to rely on an MMU/AMS system.
Settings I used, this is applicable for the boxes and the number sticks:
15% Gyroid Infill
0.1 Layer height
Brims enabled (Inner and Outer)
No supports enabled
Note that you will need to print two copies of the number sticks so that they can be glued together back to back and painted. This will allow the numbers to be visible from either side. I tried making a stick that was double sided from the start but the printing process was downright troublesome, hence the current configuration.
For easy identification of the different dices, the boxes are designed to have the same amount of sides as their maximum numerical value. E.g a D20 dice has 20 sides, a D8 has 8 sides, a D4 has 4 sides etc….
Assembly instruction (Pictures will be added soon):
- Trim off the brims on your box top and bottom, and the applicable number sticks.
- If needed, you may want to smoothen out the threads off the box by repeatedly twisting and un-twisting the halves to make it easier to install. Set them aside after.
- Glue the corresponding number stick back to back, making sure the edges align without significant overlap.
- Once the glue has set, using a sponge or flat brush, apply a layer of paint over the top surface where your numbers are located. This will give them a stronger contrast for higher legibility. Skip this step if you're able to read the numbers just fine with the filament you used.
- Deposit the sticks into the box top. Be mindful that each dice configuration has a matching number of sides to the maximum value they can hold to make distinguishment easy. Don't put too many or too few sticks, lest you be accused of cheating.
- Screw the box bottom on and give it a test shake.
- Repeat for all other dices if need. Enjoy!
If you have purchased and made your own set, please leave a make and/or comment, I'd love to see how you guys produce them. Suggestions and feedback welcome too!
