1 / 11
Flexible cell interconnect press form, h=25mm, strip h=4 w≤60; for Rept CB75
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The press form is intended for pressing a 25 mm height expansion curve into 166 mm long metal strip material.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print was made with PLA and 40% gyroid infill. That is still not strong enough to press the form in 4 times 1 mm aluminium, EN-AW1050 soft tempered, strips. I press between two 10 mm thick steel splints. I think that 4 times 1 mm aluminium is not flexible enough after pressing with a curve height of 25 mm. I prefer the flex of a 47 mm expansion curve. See my other press form model.
These models are made using Erwin Rieger's OpenSCAD pressform busbar parametric model.