Moza Stalks Adapter for Front Mount Plate Mounting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for mounting TSW Stalks to TrakRacer TR One front mount plate.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Couldn't find any adapter plates that would allow me to mount my Moza Stalks to my TR One front mounting plate, so I made my own.
All mounting holes use M8 bolts, and as designed you will likely want to print some spacers (10-11mm tall) as the plate sits on top of the bolts used to mount your wheelbase to the plate. Central hole matches the diameter of the Moza stalks and there are cutouts for some M8 nuts on the backside for attaching the stalks to the adapter. You'll want at least 4x 40mm M8 bolts for the mounting of the stalks to adapter and adapter to plate, but do double check for your unique requirements.
There is definite room for improvement on this model like chamfering the corners to allow the adapter to sit flush on the mounting plate instead of on top of the M8 bolts attaching the plate to the wheelbase.
Autodesk file included for facilitating adapting it to your front mount plates, etc.
Note: Designed for use on the TrakRacer TR One front mount plate. This may or may not work with other front mount plates (SimLab P1X Pro, Next Level Racing, etc).