1 / 3
Triple LR44 (SR44 AG13) battery replacement (eliminator)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces batteries in toys and devices using 3xLR44 with an external DC source
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 52
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Replaces batteries in cheap toys and devices with an external power source. Use 0.7-1mm thick wire to create the contacts. Devices with leds might need an internal resistor, which matches the internal resistance of the cells. 90-150 should do just fine.
I printed it in ASA, 0.15mm. Printed with supports and the cutout facing upwards. I stripped about 5cm of thick cat8 wire for the contact. I added a series resistance on one wire and hid it in its compartment. I then filled both compartments with HMA.