1 / 3
Budgie Ladder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
Our budgies chew through wooden ladders, I printed a replacement.
The ladder is too large for my Prusa Mini+ so I cut it in half (170mm) in the slicer and placed the two parts on their side. I reused the screw-hooks from the original wooden ladder, made a small hole in the top of the printed ladder to screw them into.
Print Settings - Ladder
- 0.2mm
- Support on build plate only - Snug Supports
Print Settings - Connector Sleeve
- 0.2mm
- Brim
After printing I cleaned up the supports/brim then glued the two pieces together.