Creality Space Pi "See-Saw" Heat Deflector/Shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This “See-Saw” heat shield/deflector design for the Creality SpacePi allows you to easily move the spool to position it
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 164
- Makes
- 0
- Views
- 784
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Creality Space Pi “See-Saw” Heat Shield / Deflector spacepi
This “See-Saw” heat shield and deflector is designed for the Creality SpacePi filament dryer.
Benefits
Easy spool access: The see-saw design allows you to shift the spool position for easier filament loading.
Improved usability: Unlike other designs, this shield stays in place when removing or inserting the filament spool — no more knocking it loose.
Version 2
Moved the hinge point from the ends to the middle. Some spools were too wide, having the hinge point in the middle allows the spool to be as wide as the roller.
Printing Notes
Material used: ASA
Warping considerations: Due to the geometry, preventing warping can be challenging.
I successfully printed this by heating the enclosure to ~40 °C and turning off the part cooling fan.
Re-orienting the model on the build plate might also reduce warping, but that would require significantly more supports (I did not test this).