1 / 2
Operating lever for "Flexi Fruit Picker" by Someguy @Dimbit_360382
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The "Flexi Fruit Picker" by @Dimbit_360382 was already working well, so I made a functionality improvement,
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lever to be able to operate the original “Flexi Fruit Picker” from the end of the handle.
The lever rotates around a pin that is inserted into the rectangular hole of the handle that I used, in case you want to make a different fixing you will have to design your pin considering: effective pin length 15 mm diameter 11.7 mm
Don't forget to drill a 2mm diameter hole 11.5mm from the base for a stopper (a piece of PLA filament)