ESRack - Module - Fujitsu Futro S740
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ESRack module for Fujitsu Futro S740
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ESRack module for Fujitsu Futro S740ESRack module for Fujitsu Futro S740
Fitting to the fabulous ESRack Ecosystem by EvilProphet
Suggested Print Settings
Material: PETG
Nozzle: 0.4 mm
Layer height: 0.25 mm
Wall loops: 3
Top/Bottom shell layers: 3
Infill: +30%
Infill pattern: Gyroid
Orientation: Print on front surface
Support: Not needed when correct orientation is used
High infill is needed to avoid bending after installing equipment. I used 30% infill and with heavy equipment it's bend a bit.
Assembling
To connect the each individual modules together, you need:
- 4x M4 nuts (DIN934M4)
- 4x M4x12 allen screws (DIN912M4x12-8.8)
Use standard rack screws and nuts for rack mounting.