Crutch Tip 18 mm Hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Crutch TipObject is fully copied from existing tip of Crutch.Diameter of inner hole is 18mm.I slipped proper size…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Crutch Tip
Object is fully copied from existing tip of Crutch. Diameter of inner hole is 18mm. I slipped proper size washer in hole of tip before slipping crutch in to it to prevent cutting effect...
When slicing enable support because of 1 mm diference in bottom layers
test crutch tip 18mm hole.stl = only to test if hole size fits without whole object printing...
Story behind it.....
Many many years ago I lost one Crutch Tip in the woods. In that time when I still needed crutches for some time I had to make some redneck style replacement from some rubber and stuff....
Few days ago I was again forced to use them. After all this years redneck style replacement was missing and I had to improvise again in the middle of the night with great pain in my back.
Today when I am OK again I decided to model and print a proper TPU replacement for hopefully not needed future:)
Print Settings
Supports:
Yes
Notes:
That is how I printed it.....
Sliced with: Cura
Printing Material: TPU
Support: because of 1 mm diference in bottom layers
Infill: 60%
Bottom Layers: 15 layers (to make stressed bottom with my nozzle and print hight 100% filled)
Wall Line Count: 6
Category: Other