Filament Refill Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spool holder designed for filament refill spools that screws together
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 109
- Makes
- 0
- Views
- 388
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a spool holder designed for filament refill spools that come on a cardboard tube with an ID of about 82 mm and a width of 60 mm, which I think is standard. There is one variation with a locking nub that interlocks with a cutout in the spool and one without, if your refill happen to not have one.
I've made the two halves screw together and lock in place without requiring a lot of force.
I suggest printing the threads at a lower layer height so that they work smoothly, I've provided a 3mf file that uses variable layer height.
Print in PLA without supports, around 20% infill, 3 outer perimeters and bump up the top and bottom solid layers to 6. if you want the sides to be a bit stronger.
I've taken some inspiration from this model. Thanks @Emil_1477749!