1 / 3
Silica Gel Basket for Prusa Core One — image 1
1 / 3

Silica Gel Basket for Prusa Core One

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A magnet-held basket for desiccant silica gel bags. Makes sense only in combination with a filament side door.

Rating
5 / 5
Likes
23
Downloads
57
Makes
2
Views
492
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

A magnet-held basket for desiccant silica gel bags. Prevents the filament from absorbing humidity during long prints. Makes sense only in combination with a filament side door, like this one.

The silica gel bags should be regularly dried. When the hygrometer readings in your filament compartment start rising - that's when you need to put the silica bag into your dryer!

Printed in Prusa PETG, Different variations of the model for different sized magnets. The magnets should be fixed in place with a tiny drop of super-glue.

No supports required!

The filament needs to be thoroughly dried before printing this, because you will have a lot of stringing otherwise! Be warned, and don't blame it on the model!

Tags