Silica Gel Basket for Prusa Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnet-held basket for desiccant silica gel bags. Makes sense only in combination with a filament side door.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 57
- Wydruki
- 2
- Wyświetlenia
- 492
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A magnet-held basket for desiccant silica gel bags. Prevents the filament from absorbing humidity during long prints. Makes sense only in combination with a filament side door, like this one.
The silica gel bags should be regularly dried. When the hygrometer readings in your filament compartment start rising - that's when you need to put the silica bag into your dryer!
Printed in Prusa PETG, Different variations of the model for different sized magnets. The magnets should be fixed in place with a tiny drop of super-glue.
No supports required!
The filament needs to be thoroughly dried before printing this, because you will have a lot of stringing otherwise! Be warned, and don't blame it on the model!