Kitchen sponge holder Evo
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.30 – €4.03 net (excluding VAT)
For file: odkladatko_houbicky v3 v2_0.4n_0.2mm_PETG_MINIIS_2h57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.67 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 2.96 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple kitchen sponge holder with place for dishwashing detergent and sponge towels.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 1
- Views
- 115
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
For max. 67 mm diameter dishwashing detergent container.
You can use a rubber feets under the holder.
Recommened print settings:
- material PETG or PLA
- 3 perimeters
- 40 % infill
- no support needed