Dial-type battery source switch label plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For 12V or 24V battery source rotating switches. Make the markings larger and easier to read with a drop-in dial cover.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 9
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v2.0
Dial-type battery source switch label plate
There is a common type of battery source switch, for 12-24V DC systems, primarily marine setups.
The switch is sometimes called a "Marine Battery Isolator Master Switch", or a "Contour Surface or Recessed Manual Battery Master Switch".
I chose to use one of these switches for a DC power project. The switch is robust but the lettering is hard to read, even in ideal conditions. I modeled the switch top and created a one-part or two-part rigid label plate that does not interfere with the switch.
While the piece can be printed all at once, I find that printing two parts separately and gluing them together with CA glue produces a faster and better result than printing a single piece with a huge support raft.
Naturally the labels are easy to change. OpenSCAD source is included.