1 / 5
Ford Maverick Wireless Charger — image 1
1 / 5

Ford Maverick Wireless Charger

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Aftermarket Wireless Charger for a spare Qi Charging Pad I had sitting around.

Rating
0 / 5
Likes
4
Downloads
28
Makes
0
Views
546
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

This is a drop-in wireless charger into the Ford Maverick Center Console Tray. I have a 2025 XLT but the best I can tell it's the same on the other Maverick years and models. It was made for the Nimble Apollo because I happened to have one laying around and it fit perfectly. Unfortunately the charging pad isn't designed for cars, so you will have to keep an eye on device temperature in a hot car to avoid overheating. I just plug it into the USB-C port below the infotainment, and that supports Qi Fast Charging for my Samsung. I also used a tool box liner to avoid any movement on the pad. It's only necessary if the Charging Pad doesn't have enough grip for your phone/case combination.

There's an option for those who want the MAVERICK text on the top, and one for none if you want to leave it blank or add your own in PrusaSlicer.

Materials Required

  1. About 80g of PETG (Or other heat-resistant Filament)
  2. Nimble Apollo Wireless Charging Pad
  3. Tool Box Liner (Optional)
  4. 3M VHB Tape (Optional for Liner)

Print Settings

  • 0.2mm Structural PETG
  • 5 Perimeters
  • 15% Gyroid Infill
  • Support Optional for the bottom lip only
    • I recommend it after running into a few issues
  • Brim if you experience adhesion issues on the Build Plate
  • [OPTIONAL] Print Layers 44-46 in Black for Text to be viewed
    • Also Hides any inconsistencies in the Liner Cut

Assembly Instructions

  1. Print the Wireless Charger Insert on your printer. You may need to rotate it 90 degrees along the Z axis to fit Prusa Printers (like the MK4S or Prusa Core)
  2. Remove any support material and insert the Charging Pad. It should click neatly into place.
  3. Route the cable in the cable channel so it comes out the side and cable manage excess as necessary.
  4. [OPTIONAL] Cut down the Tool Box Liner into a 6.5in x 3.25in rectangle, and round the corners with scissors.
  5. [OPTIONAL] Apply VHB Tape to the bottom of the recess, and apply the tool box liner.
  6. Set it inside the center console tray, and plug it into the USB-C port under the infotainment system. Tuck away excess cable as necessary.
  7. Place phone on the center of the charging pad, and you should see it start charging (if the truck is on)!

Tags