K2 Pro Poop Chute
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
K2 Pro Poop Chute for right side
- Rating
- 4.5 / 5
- Likes
- 30
- Downloads
- 667
- Makes
- 3
- Views
- 3,253
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Waste (Poop) chute for the K2 Pro.
My first creation as beginner. Couldn't find any for the new K2 Pro so had to design my own and this is what I came up with.
I printed this in PETG with generic Creality settings and profiles, using Tree Organic supports.
Made for right side.
It does have two small 1mm runners along the back side that fit into the waste port to help hold it aligned in place (Not really needed but I'm a little OCD for over doing things)
Images show old version, I have changed the mounting holes for the screws to be a bit stronger and easier to print and made it wider as I was having poop get stuck at the top of the ramp, hopefully this solves the problem.