1 / 8
TIG Filler Rod storage tube holder — image 1
1 / 8

TIG Filler Rod storage tube holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I just knocked myself up a quick basic trolley for my R-Tech Welding TIG welder to free up some bench space, and…

Rating
5 / 5
Likes
22
Downloads
172
Makes
1
Views
1,733
Reviews
1

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

I just knocked myself up a quick basic trolley for my R-Tech Welding TIG welder to free up some bench space, and wanted to store all the filler rods a bit nicer than just lobbing the tubes in a corner.

The filaments come in a 32mm diameter, 1m long see-through tube, with rubber end-caps on each end. There's two sections to this - one is designed as a base, for use without an end cap, the other is designed as a through support.

So, many hours in SketchUp, and about 4 hours printing per section on my Sidewinder X1, and I've got storage for 12 different filler rods - 3 sizes each of 316L Stainless, Mild Steel, and 5356/4043A aluminium.

Secured with M5 dome-head bolts.

I sliced it in Cura 4.10, and used Tree supports for the bolt opening.

Category: DIY

Tags