Surface mounted dual socket box 45° degree
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.91 – €7.22 net (excluding VAT)
For file: Aufputzdose 45 Grad_0.2mm_PETG.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.56 excluding VAT (range midpoint).
- Weight reported by the author
- 84 g
- Print time reported by the author
- 6.74 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Socket box for 90° corners with breakout areas for wiring and mounting. Suitable for two 86x86mm sockets.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The model:
Size: 84x155x42mm (width, length, depth)
Strength: 2mm
Two reinforced break-through holes on each angled side for surface mounting
Eight holes for mounting the sockets in the box
The print:
Material: PETG
Layer-height: 0.2mm
Infill: 25%
No support structures needed
The make:
Tools: Soldering iron, screwdriver
Material: 8x M3 brass inserts (5mm outer diameter, 4mm height), 8x M3 countersunk screws (6mm length), suitable sockets (86x86mm) with front-plate (157x86)