1 / 1
Modified Arrow and Quarter Circle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified this jig so I could use a hex driver without a set screw. I also felt that circle was too big for Prusa Mini
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I modified this jig so I could use a hex driver without a set screw. I also felt that circle was too big for my needs with my mini so I made it into a quarter and made the hole to fit the hex driver. Typically my bed level is adjustment is <90 degrees so the quarter circle suits my needs quite well and fits better on the edges of the bed.
You will need to ream out the hole a bit on the quarter circle to make it fit. The hex on the arrow will be a tight friction fit.