SIREN BLINK ORACLE STOCK by DMF
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Blink is akward. Make it a usable and proper BR. 👌
- Rating
- 5 / 5
- Likes
- 10
- Makes
- 2
- Views
- 262
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Commercial Use - No Derivative
Siren Blink Oracle Stock Files. Does not fit oem battery. Uses 5x2 Magnets (6) and (1) 15 or 16mm cap screw. Trim the back of the blaster like pictured to run the battery board out of the back and sandwich the stock in the old battery tray. For lid alignment you can mark the key inside the lid before gluing to get the fit you want or apply light amount of glue to the lid where the key inserts. Install the key quickly test fit the lid and remove it and let it dry. Obviously make sure the magnets are polar opposite. I did the bottom two the same the top flipped that way the cover doesn't wonder up. The battery board is covered on the right side but partially exposed. I recommend hot gluing the void behind the battery board. Enjoy!!! SHARE THOSE MAKES!!! Thank you for your support.