1 / 9
SIREN BLINK ORACLE STOCK by DMF — zdjęcie 1
1 / 9

SIREN BLINK ORACLE STOCK by DMF

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Blink is akward. Make it a usable and proper BR. 👌

Ocena
5 / 5
Polubienia
10
Wydruki
2
Wyświetlenia
260
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Commercial Use - No Derivative

Siren Blink Oracle Stock Files. Does not fit oem battery. Uses 5x2 Magnets (6) and (1) 15 or 16mm cap screw. Trim the back of the blaster like pictured to run the battery board out of the back and sandwich the stock in the old battery tray. For lid alignment you can mark the key inside the lid before gluing to get the fit you want or apply light amount of glue to the lid where the key inserts. Install the key quickly test fit the lid and remove it and let it dry. Obviously make sure the magnets are polar opposite. I did the bottom two the same the top flipped that way the cover doesn't wonder up. The battery board is covered on the right side but partially exposed. I recommend hot gluing the void behind the battery board. Enjoy!!! SHARE THOSE MAKES!!! Thank you for your support.

Tagi