Bracket - Mount Hose Below Siding At Foundation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lift hose off ground, held against foundation below T111 siding.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I create mostly utilitarian functional models. Generally addressing the need is the primary concern and looks come secondary, if considered at all.
Please leave a comment if you print this and find it useful!
I needed to run a garden hose against the side of my house and I wanted it off the ground / pavement. I have T1-11 wood siding and the foundation block/concrete wall is exposed below that. This bracket will screw into the wood siding and captures the hose, holding it against the house block/concrete wall, just below the siding.
It can be used every 2 feet or so depending on how much of a droop is visually acceptable in the house between brackets.
This bracket has 5mm holes for pan head screws. I think I used #8 or #10 stainless pan head screws. Hold the hose below the T1-11 siding and have the bracket grip the hose. Screw the bracket into the wood siding - vinyl siding should be acceptable as well though any angle may cause this bracket to not be perfectly vertical and may expand the gap that holds the hose.
Use/install at your own risk! You will be making holes in your house's siding. Understand that before use. Caulking those holes during the install may be a good idea to prevent or at least reduce the risk of wood rot over time.
Please comment below if you actually use this! Thank you