1 / 4
Stackable FIFO can storage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another FIFO can storage, but this one is stackable and made out of hexagons.
- Rating
- 4.846 / 5
- Likes
- 721
- Downloads
- 1,540
- Makes
- 14
- Views
- 9,458
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Stackable FIFO can storage. Designed to hold 8 cans ~75 x 115 mm (3" x 4.5"). Two, probably three, can be stacked on top of each other.
Printing
- No supports.
- I've printed 3 perimeters, 15% infill.
- Print each one of the walls on the back, flat side.
- Print 4 x connector on the flat side.
- Print 4 connecting bar, bar facing down.
Assembly
- Front and back walls have tabs and holes to get them aligned. Use connectors to connect front and back parts together.
- Connectors are designed with fit tightly and hold by friction. Either use mallet or glue if you have problems fitting them together.
- Connecting bars work the same way as connectors. They are connecting left and right side of the box.
- Please check the photo where connection points are recommended.
- Connectors can be used to connect stacked containers if needed.
STEP files attached. Enjoy!