1 / 5
Baxi Duo-Tec Compact boiler Condensate Trap screw cap — image 1
1 / 5

Baxi Duo-Tec Compact boiler Condensate Trap screw cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement condensate trap screw cap for Baxi Boiler

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
49
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement screw cap for the Baxi Gas Boiler. The condensate trap has a screw that you can unscrew if you want to flush and clean it. The original one had formed a crack and was leaking condensate water. After measuring the thread it seems it is a M18x1.5 screw thread. After some model tests while being a snug fit. It's a good replacement in a pinch. 

Recommended to print in PETG or stronger filament. Since This sits near the gas boiler and the condensate water is usually warm/hot. I reused the original rubber gasket from the broken screw. But I measured and just added a simple on to print if needed in TPU. 

Three shapes added for preferred use.

Tags