1 / 4
Truly 3D Cat Magnet aka "Catgnet" - 12mm x 3mm Easy Print no supports 12mm — image 1
1 / 4

Truly 3D Cat Magnet aka "Catgnet" - 12mm x 3mm Easy Print no supports 12mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fridge cat magnet

Rating
5 / 5
Likes
4
Downloads
20
Makes
1
Views
121
Reviews
1

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

3D cat magnet for your fridge. I didn't want a flat cat magnet like most models out there, so I made this guy.

  1. Make sure it is oriented with the flat side on the build plate
  2. Make sure to add a pause at 3.15mm to insert the 12x3 magnet

Enjoy!

My Print Settings:

  • Material: PLA
  • First layer height: 0.3mm
  • Layer height: 0.2mm
  • Wall thickness: 0.45mm 
  • Wall loops: 2
  • Wall order: Outer/Inner
  • Wall generator: Arachne
  • Bottom surface pattern: Rectilinear or Monotonic
  • Top surface pattern: Doesn't matter as there is very little “top surface”
  • Bottom shell thickness: 0.7mm
  • Top shell thickness: 0.8mm
  • Infill density: 20%
  • Infill pattern: Adaptive Cubic
  • Nozzle size: 0.4mm 
  • Supports: Nope
  • Speed: You decide based on your printer! I used 60mm for walls and 100mm for infills

Total print time 48min

Tags