1 / 7
Glowforge Pro Air Assist Nozzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an attachment for the Glowforge Pro so someone can add air assist.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This design currently works, but I will be improving it soon.
I recommend the following setting for the 3D print:
- Use at least 20% infill.
- Use PETG instead of PLA. Stronger materials than PETG will work as well.
- I recommend painting on the supports. Do not put supports in the inner tube or in the lower chamber. The supports will get stuck.
- Use 3D Honeycomb for the fill pattern.
- I would use a STRUCTURAL nozzle setting instead of SPEED.
- Use Organic for the Support Style. Use Honeycomb for the pattern.
- You can test without a Brim, but you might want to use a small Brim around 2mm-3mm if you have issues with adhesion to the plate. 5mm is unnecessary.