18 models
This is a Glowforge exhaust vent adapter for a 6" hose. I used it when attaching my AC Infinity S6 inline fan to my Glowforge. The printed piece should press fit nicely onto the Glowforge exhaust outlet, and there is also a recessed area…
Replacement pulley wheel. Recommend printing with supports, and sanding top edge after removing supports to get rid of any rough edges that might damage the belt.
Resized cover for a 4" vent with M3 sized screw holes. Included threads for attaching and holding the hose. Used for glowforge window vent. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category:…
This pulley is located near the rear exhaust on a Glowforge. Many other files I tried broke after a while from being too thin, this was designed to have at least a 0.8mm wall and some filleted edges to reduce weak points. Easy to print…
This is a remix of two other designs with an added hood exhaust. The screw holes aren't quite the right size for the bolts I used, but can easily be drilled out. Enjoy! Category: 3D Printing
This is a replacement Glowforce Gantry wheel. It seems the original part is a two-piece that tends to split apart after so much use. This is a single piece that you press-fit in the original bearing. The part was printed, with a bit of…
The exhaust port on the glowforge is only about 12.5 mm long, which makes it somewhat challenging to connect and remove an exhaust vent. This is a simple design to extend the exhaust port, while keeping a good seal. This is designed to be…
My brother owns a Glowforge and there seems to be a common problem with one of the Gantry Wheels that keeps breaking. This is version 2 of a design that also seemed to shatter as well. Previous versions were printed 'horizontal' so that…
Glowforge Pro V-Wheel Rail Bearing replacement. Couldn't find a model for the bigger side rail bearing rollers, so I made one. The V1 file has slightly more clearance to make the bearings fit, V2 is a little tighter fit. There is a total…
Sources: [The original I uploaded to thingiverse](https://www.thingiverse.com/thing:3337308) [CAD on…
I wanted to make sure that the extension was airtight, so I modified it to have an inner lining made from flexible TPU. It requires a dual filament printer. Picture is after about 1 year of use. The TPU discolored, but stayed flexible.…
My brother has a Glowforge laser and one of the gantry wheels split on him. Seems this was a bit of a more known issue that someone on the GF Forums created an STL to reprint a replacement one. I did so but the STL file did not…
Did you also make the dumb mistake of buying a Glowforge laser cutter like the Aura but you can't afford to replace it? Don't want to give Glowforge another dime so you bought the XTool air purifier? Let's connect them! The small end of…
Keep your materials securely in place on your Glowforge Aura honeycomb bed with these 3D-printed hold-down pins. Designed for precision and ease of use, these pins prevent smaller or flexible materials from shifting during laser cutting…
This design currently works, but I will be improving it soon. I recommend the following setting for the 3D print: Use at least 20% infill. Use PETG instead of PLA. Stronger materials than PETG will work as well. I recommend painting on…
Using a couple of pieces of scrap wood, 4 drawer slides and 2 dowels. M3 - 8 bolts to attach the adapter to the drawer slides M3 - 15 bolts with nuts to fasten the adjustable arm to the slotted elbow. Used for supporting material as it…
You're welcome. Save yourself the money!
Did you also make the dumb mistake of buying a Glowforge laser cutter like the Aura but you can't afford to replace it? Don't want to give Glowforge another dime so you bought the XTool air purifier? Let's connect them! The small end of…
