Glowforge 6" Vent Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6" exhaust vent adapters for a Glowforge.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 99
- Makes
- 1
- Views
- 906
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a Glowforge exhaust vent adapter for a 6" hose. I used it when attaching my AC Infinity S6 inline fan to my Glowforge. The printed piece should press fit nicely onto the Glowforge exhaust outlet, and there is also a recessed area that allows you to firmly tighten it on with a hose clamp. I provided the STEP files in case you need to modify the models.
I have also uploaded a 90deg adapter and a flange. I used the flange to attach the exhaust hose to some ½" insulation foam in my window, but have not tested the 90deg adapter yet.
I printed the straight adapter and the flange at 0.25 mm layer height without any supports. Since the stress on these parts will be primarily be radial, I recommend using as many perimeters as possible. This will give you a very strong print that can withstand the forces from the hose clamps.