1 / 3
Filter Mount System for iPhone 17 Pro and 17 Pro Max - 58mm & 67mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filter ring and phone base plate to mount a 58mm or 67mm filter magnetically to the iPhone 17 Pro and 17 Pro Max
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 377
- Makes
- 2
- Views
- 2,588
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you need to attach a ND filter to your iPhone 17 Pro or Pro Max? Here's a solution.
A total of 10 magnets are required. Magnets should be 10mm x 2mm.
- Glue magnets into each of the 5 depressions on both the base plate and filter ring.
- Affix the base plate to your phone's camera plateau with thin double-sided tape.
- Magnetically attach the filter ring to the base plate.
The fine threads for the filter require you to print the filter ring at a small layer height. In my case, I used PrusaSlicer's variable layer height setting to print the thread layers at 0.7mm. I also had to disable Arachne and enable “Detect thin walls”.