The Herringbone - MATX PC Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Micro ATX PC case that supports full-sized ATX PSUs
- Rating
- 1 / 5
- Likes
- 79
- Downloads
- 292
- Makes
- 0
- Views
- 2,811
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Dimensions: 248x332x278mm (22.9 L)
Features:
- Supports 2.5" and 3.5" drives
- Allows for GPUs of up to 280 mm in length
- Fits 2 92mm intake fans
Print with PETG (I used SUNLU) and combine the segments with super glue. For assembly, you will need M3 standoffs, PC chassis screws (#6-32 UNC), and motherboard screws (M3). You will also need a soldering iron to inset the standoffs into their holes. A PC screw set like the one pictured below should have all you need.
For the front panel IO, drop the printed buttons in and then use 2 chassis screws to keep the “button bracket” in place. The specific height of the IO buttons is important; I used 12x12x12mm pushbuttons. You can also use a 5mm LED as the power LED and optionally you can attach two front USB 3.0 ports (pictured below).
