Keychron K8, K8 Pro, K8 Max or K8 HE in your own color
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UPDATED April 2026 - All parts you need to customize, replace or repair on your Keychron K8, K8 Pro, K8 Max or K8 HE.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IMPORTANT UPDATE
Keychron has open-sourced their design files, you can get the model from their repository;
https://github.com/Keychron/Keychron-Keyboards-Hardware-Design
So you want a Keychron K8 Pro or Max in a color of your choice? Well you're in luck.
You will need 360 mm build width at least, so Prusa XL or Sovol SV08 Max etc.
Base case; you can get this from Keychron directly;
Information: https://www.keychron.com/pages/k8-user-manual-1
Direct Download: https://cdn.shopify.com/s/files/1/0059/0630/1017/files/K8_case.stp?v=1685152885
This is a K8 case, not a K8 pro; some standoffs are in the wrong spot, For K8 Pro, Max and HE, I added a remixed version. I cannot find any mention of any license for the model, so it is here until I am ordered to remove it.
Printing is a challenge, I ended up printing this with PLA support, bottom down, but I think it would be even better to print top-down with PLA snug “soluable” support. Yes, this takes a lot of PLA and you have to tweak settings to keep the PLA on the build plate… I ended up with a fix-her-up-er and used hotsnot to keep the bezels on ;P
I am contemplating a 3-part version to print with minimal support, but will require additional screws.
Big feet;
Small feet;
Modeled by myself, see files.
Bezels;
Modeled by myself, see files, i just scaled my https://www.printables.com/model/1167235-keychron-k2-he-trims-and-bezels to 348.5mm
Trims;
These are slightly different than the K2 ones. see files
Switch plate;
Using my old project https://www.printables.com/model/415721-prototype-3d-printed-hot-swap-mechanical-tkl-keybo, I created a plate that fits. The screw holes for the K8 version I modelled using the case, the Pro/Max/HE version I measured myself.
WARNING The plate 3D printed is very flexible, it's a challenge to assemble the keyboard without plate-foam. It will help if you have experience building keyboards.
The measurements taken to create the Pro/Max/HE case are reused for the creation of the plate.
Power/Mode switch, Mac/Win switch;
Available, but very fragile. Would suggest ABS or ASA, printed with soluble or non-stick material for supports. I have printed in PETG with PLA support, and with much care, it can be done. The latest version I printed was on the side, using regular organic detachable supports. They came out fine.
And to make things more complicated;
For a real K8 Pro, you need the “Replica K8 Pro Buttons”
For the original K8 keyboard, you need the “Modified Button”
Keycaps:
Use your own, or print some; I printed these;
https://www.printables.com/model/973476-full-mx-keycaps-set-ndeg3-iso-uk-fr-es-ansi-us
I remixed the Insert and Delete keycap to have the same font-size as the Home,End, Page up/Down. so it looks consistent., see; https://www.printables.com/model/1433848-remix-twisted-keycaps-no3-ins-and-del-smaller-font
Special considerations for the K8 Original keyboard.
The K8 (Original) has a single PCB, the 3 posts on the right hand side are a bit off, it's a tight fit. This is also the case in the original moulded case.
The stabilisers in the K8 are Plate mounted. I strongly suggest the enforced replacement plate, if the material of choice is flexible enough to fiddle the stabiliser-bar in. When printing in a very rigid material, or cutting from metal, use the one without the enforcement.
I modelled the buttons on the K8 Pro and adapted them for this case. They work perfectly in the replacement case, but they might not 100% fit an original case. Since these switches are quite hard to remove without breaking, I did NOT test the printed in the moulded case or vice-versa.
Special considerations for the K8 Pro, Max or HE keyboard.
I adapted the K8 case, so a moulded K8 PMH case WILL be different, but I have taken as much care as I could within TinkerCAD to make it fit the original keyboard parts.
I modelled the buttons on the K8 Pro, the K8 Pro, Max and HE share all plastics, plate and PCB layout, so the “Replica” buttons will fit a moulded case. The case here provided is adapted to fit the original plastics/parts/
Final note; I am now working on a replica PCB with hot-swap sockets. I am literally day-one in KiCad, so if anyone out there has a TKL PCB design with per key RGB, QMK/VIA compatible microcontroller and bluetooth and willing to share knowledge; please let me know :)