Table leg protection
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.07 – €1.30 net (excluding VAT)
For file: Table leg protection_0.4n_0.2mm_PLA_XLIS_53m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.19 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 53.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Protect the feet of your table :)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Story: Our balcony got flooded with water and we were concerned that the legs of our table would rot. Therefore, I have designed this table leg protection. The model is specifically designed for this table.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks! I have used PLA, but you can also use PETG, ABS and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| eSUN PLA+ | Amazon |
| Anycubic PLA | Amazon |
PETG | |
| Eryone PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| Elegoo Rapid PETG | Amazon |
ABS | |
| Amazon Basics ABS | Amazon |
| Creality ABS | Amazon |
| OVERTURE ABS | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!