Mechanical Screw Sorter - Gridfinity Version with Improvements
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This sorts into my d3 (divided 1/3) gridfinity bins, has a footing for the tray, and holes for heat set inserts.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 37
- Makes
- 0
- Views
- 1,004
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Now you can sort the screws directly into practical bins! Use my d3 bins (d2 wave can be used for 40 & 35 mm slots) to keep them separated. I found that the upstream handle caused binding, so I recommend using the “contour grip” instead of the “handle” when using the device. You probably still need to file the sides of the rotator and lubricate it such as with silicone grease.
Required Bins
(downloaded separately)
d3 (divided ⅓) bins such as: Gridfinity 1/3 Size + Labyrinth, Horseshoe, Tapered, & D2 Wave + Label Slot (1x2x6 d3 and d2)
d2 “wavy” bin can be used for 35 and 40 mm slots since right slot is ⅓ the size at the far end when installed.
I don't know if any other d3 (1/3) bins but if you know of any please post a link or upload using the remix feature if you remix them.