Fire Extinguisher Mounting Plate for Qidi Plus 4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plate to hold an automatic fire extinguisher inside the Qidi Plus 4
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 3
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Mounting plate to hold a small adhesive-mounted automatic fire extinguisher inside the Qidi Plus 4 print chamber. The plate snaps in place above the chamber heater and provides a place to attach a small fire extinguisher out of the way of the bed and gantry. This is designed to work with the original factory chamber heater.
I'd recommend printing with a material that can withstand the heated chamber temperatures. It helps if it's something that is able to flex a little bit to assist with getting it into place. I used polycarbonate for this.
Hopefully this isn't necessary, but it might help slow down a dangerous situation.
Here's the automatic fire extinguisher I used: https://www.amazon.com/dp/B09YS6DJWN