Fire Extinguisher Mounting Plate for Qidi Plus 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plate to hold an automatic fire extinguisher inside the Qidi Plus 4
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mounting plate to hold a small adhesive-mounted automatic fire extinguisher inside the Qidi Plus 4 print chamber. The plate snaps in place above the chamber heater and provides a place to attach a small fire extinguisher out of the way of the bed and gantry. This is designed to work with the original factory chamber heater.
I'd recommend printing with a material that can withstand the heated chamber temperatures. It helps if it's something that is able to flex a little bit to assist with getting it into place. I used polycarbonate for this.
Hopefully this isn't necessary, but it might help slow down a dangerous situation.
Here's the automatic fire extinguisher I used: https://www.amazon.com/dp/B09YS6DJWN