1 / 3
Shroud for xfx amd radeon rx 6800 xt swft 319 — image 1
1 / 3

Shroud for xfx amd radeon rx 6800 xt swft 319

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Shroud for xfx amd radeon rx 6800 xt swft 319 holding 3 92mm standard fans.

Rating
0 / 5
Likes
7
Downloads
75
Makes
0
Views
599
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Filament used: ASA for improved thermal resistance. Printed using standard Bambu Lab printer settings.

It is not perfect, but it works for me (the small part does not fully align with the larger one).

Can be printed as a single piece on the Bambu Lab H2S, or printed in separate parts on smaller printers.

Temperatures are at least 10 °C lower, or better, and the setup is significantly quieter.

The fans could be positioned slightly closer (by approximately 3 mm).

A backplate extension is included.

I used M3 × 30 mm ISO 10642 screws (10 mm is the minimum; do not exceed 20 mm in length).

Tags