1 / 3
Shroud for xfx amd radeon rx 6800 xt swft 319 — zdjęcie 1
1 / 3

Shroud for xfx amd radeon rx 6800 xt swft 319

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shroud for xfx amd radeon rx 6800 xt swft 319 holding 3 92mm standard fans.

Ocena
0 / 5
Polubienia
7
Pobrania
75
Wydruki
0
Wyświetlenia
599
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Filament used: ASA for improved thermal resistance. Printed using standard Bambu Lab printer settings.

It is not perfect, but it works for me (the small part does not fully align with the larger one).

Can be printed as a single piece on the Bambu Lab H2S, or printed in separate parts on smaller printers.

Temperatures are at least 10 °C lower, or better, and the setup is significantly quieter.

The fans could be positioned slightly closer (by approximately 3 mm).

A backplate extension is included.

I used M3 × 30 mm ISO 10642 screws (10 mm is the minimum; do not exceed 20 mm in length).

Tagi