1 / 1
Land Rover Series I expedition photo hueforge — image 1

Land Rover Series I expedition photo hueforge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

One of the Landies traversing a sketchy bridge during the 1955-1956 Oxford Cambridge Far Eastern Expedition

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
104
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Project: firstoverlandexp.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x135.59mm in size

 You may print at higher layer heights below the Base Thickness of 0.48mm

 The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:

      #000000 PLA+ Esun Black  Transmission Distance: 0.1

      #0086b3 PLA Jessie Premium Pure Cyan  Transmission Distance: 2.4

      #aa6f3e PLA PolyLite Pro Army Beige  Transmission Distance: 1.8

      #ffcbac PLA Sunlu Skin Beige  Transmission Distance: 7.4

      #ffffff PLA+ Sunlu White  Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

      Start with Black

      At layer #10 (0.88mm) swap to Pure Cyan

      At layer #12 (1.04mm) swap to Army Beige

      At layer #15 (1.28mm) swap to Skin Beige

      At layer #18 (1.52mm) swap to White for the rest.

Tags